AGOSTA
INDUSTRIAL
MACHINES
Serving the Forging Industry
|
Customer
Equipment
|
|
| 200 ton | Trim Press / Side Shear |
| 400 ton | Trim Press / Side Shear & 500 ton Trim Press |
| 600 ton | Coining Press, 33SPM, 4" Stroke, Air Clutch |
| 750 ton | Numatic Hammer |
| 2,000 lb | CHAMBERSBERG Hammer, Ceco Air (No SOlid Guides) |
| 1,000 ton | Closed Die Forging Press |
| 1,500 lb | Close Die Air Hammer |
| 1,500 ton | Open Die Forging Press |
| 1,600 ton | Closed Die Forging Press |
| 3,500 ton | AJAX Press Ram |
| 4,000 lb | ERIE or CHAMBERSBERG Board Hammer |
| 4,000 lb | CHAMBERSBERG E.C. Ram |
| 4,000 lb | ERIE Columns |
| 4,000 lb | ERIE Board Hammer (No Double Roll) |
| 3,000 lb | Board Hammer |
| 4,000 lb | CECO Hammer Parts |
| 6,000 lb | CECO Hammer or Parts |
| 8,000 lb | ERIE Open Die Hammer |
| 8,000 lb | ERIE Hammer Spare Parts, Closed Die |
| 8,000 lb | ERIE Hammer Ram |
| 3,500 lb | CHAMBERSBERG Frames for Open Die Hammer |
| Billet Shear up to 2" | |
| Aluminum Cut Off Saw, Fast, Auto, Up to 6" | |
| 800 ton | Knuckle Joint Press |
| 8,000 lb | ERIE Hammer Base |
| 3,500 lb | ERIE Anvil |
| 12,000 lb | Forging Hammer |
| Large Planer Mill | |
| Ring Mill 40" Max. *Radial Axel | |
| HZ. Band Saw. Large Capacity 40" + | |
| Water Jet Cutting System | |
| Heat Treat Oven, Belt or Pusher, 40' x 36" x 40" 1800 Degrees F | |
| Plate Saw, High Speed, 12' Sheets x 6" | |
| Large Capacity Air Compressor | |
| 40' Belt Furnace, 2600 Degrees F w/ Quench | |
| Ring Expander 50" | |
| Maxi Press's - any Tonnage | |
| 1,000 to 4,000 Ton Open Die Forging Press, 4 Post | |
| 20,000 lb | Ram for CHAMBERSBERG Forging Hammer |
| 5,000 lb | CECO Frames and All Parts |
| INGERSOLL-RAND Pump MDL. 2-1/2 x 7V5, 294 rpm, 200 gpm,5300 psi | |
| 5,000 lb | ERIE Steam Hammer Ram |
| Any Open Die Hydraulic Press or Hammers - Top Dollar Paid | |
| Saw, Aluminum Cut Off - 5-1/2" Rounds, Auto & Fast | |
| Ring Mill Up to 60"+ (WAGNER) | |
| Ring Expanders 30" - 120" or more. Any condition | |
| CINCINNATTI T-10 Hz. Machining Center | |
| 300 ton | Hyd. Press |
| 4,000 lb | ERIE Hammer (Board), Ram and Frames |